Samsung M01 Core Settings Force Stop Problem Fixed.

 On, this post today we are going to share How to fix Setting Stop Problem from Samsung galaxy M01 Core phones. It is based on Mediatek MT6739 CPU with Android Version 10 (GO Edition).

Samsung  M01 Core Settings Force Stop, Setting not responding, Force Close, Force Stop, M01 core Wifi not Connect, M01 Core Settings Stop error

Samsung M01 Core Setting Error: 
               First you have to Download Firmware according to your Phone Binary Versions i.e. Binary U1, U2, U3, U4, U5, U6 or S1, S2, S3, S4, S5, S6. If your phone have Binary U2 or S2 then you can flash U2 or S2 or higher binary Files but you cannot Flash Binary U1 or S1 Firmware's. In new Samsung phones Downgrading your Binary Version is not allowed so it may Brick (Dead) your phone too. So we want to make you clear that always use same binary or higher binary Version files. Unfortunately, Settings Stop problem occurs due to Virus in Phone or your phone have Software Problem. If you face same problem and you make a factory reset/ Hardreset your phone then it work for 3 to 7 days only. So we request you to read full article and follow Step by Step guides below;
👉Step by Step Guides:
  • First Find out your Phone Binary Versions from Recovery Mode or Download Mode,
  • Now, Download M01 Core Same binary or High Versions Firmware from Z3X Support,
  • If you don't have Z3X box then use Z3X Google Chrome Extensions,
Samsung  M01 Core Settings Force Stop, Setting not responding, Force Close, Force Stop, M01 core Wifi not Connect, M01 Core Settings Stop error
  • You can use SAMFIRM and FRIJA Tool from here to download latest Firmware,
  • Extract Firmware then use Z3X or Odin Latest version Tool for Flashing,
  • Power Off your phone Press Volume Down then Insert USB cable which is attached on your Computer,
  • Now you can see Volume Up to continue and Volume Down to Cancel,
  • Press Volume UP now  your phone is in Download Mode,
  • Open Z3x or Odin tool then select BL, AP, CP, CSC File,
  • Now Click on Flash button,
  • It takes little time to complete Flash, Speed depends on your PC,
  • After Flash complete, first boot may take few minutes, be patient,
  • Now you can Connect WIFI and Setup your phone,
  • It may ask for Previous Lock or Google Account during setup,
  • If you don't know Google Account or Lock then you can bypass it,
  • For removing google account you can find many post in our site. check it,
  • After that you can get Welcome Screen,
  • That's all ! Now your M01 Core phone is ready to use.
                             Samsung A10 FRP Remove Final Solutions All Versions Supported.

By this way you can Repair Software Problem of your M01 Core phones. We try our best to help you in repairing fields. All solutions we provide here is tested before posting but, you have to perform this task with your own risk. If you found this post helpful then feel free to share it with your friends.

 


Post a Comment

Please do not enter any spam link in the comment box.

Previous Post Next Post