Samsung Galaxy A3 2017 (A320FL) 6.0.1- 7.1.1 Root file and guide free.. - GSM Nepal Zone

GSM Nepal Zone

Firmware, Tools, Drivers, FRP Bypass, IMEI Repair, PC Apps, Guides and manymore...


Post Top Ad


Samsung Galaxy A3 2017 (A320FL) 6.0.1- 7.1.1 Root file and guide free..

Hello friends, today we are going to share Samsung Galaxy A3 (a320fl) Root file free. Root Support up to android version 6.0.1- 7.1.1. File came into .Zip format and contain Odin, Twrp and Superuser SU file.

1) First Download A3 2017 (a320fl) root file from  below given link  and Extract it,
2) Copy file to your internal storage/ SD card,
3) Now Go to Settings -> About Device ->Software Information and tap Build Number for more than 8 times until it says Developer Options is enabled,
4) Go back and find Developer options and enable OEM Unlock and USB debugging,(Enabling OEM unlock is very important.)
5) Now turn off your Phone press and hold the Volume Down + Home + Power keys at the same time for 2-3 seconds to boot your phone into the Download mode,
6) Release the keys as soon as you see a blue screen with exclamation sign and press the Volume Up key,
7) When your phone gets into the Download/ Odin mode, connect your Galaxy SM-A320FL to your computer using a USB cable,
8) Open the Odin folder and launch the Odin as administrator,
9) The ID:COM port on Odin will be highlighted in blue/ yellow as soon as your device is detected,
10) Click the AP button in Odin and load the twrp_3.1.1-1_sm-a320f_11917 file which you have downloaded,
11) Then Click the Options tab in Odin and uncheck Auto-Reboot option.
12) Now click the Start button to start TWRP installation. When TWRP is installed and you get PASS! message in Odin. Disconnect the USB cable.
13) Now press and hold the Volume Down + Home + Power buttons at the same time and immediately swap to Volume Up as soon as the screen goes blank/black while still pressing the Home and Power keys.
14) Keep the 3 keys pressed until you get into TWRP Recovery.
15) At this point, you will reach the screen asking if you want to allow system modifications. Swipe for modification.
16) Go to install and select file. Swipe again to install Supersu file.
17) After the is flashed, go back to TWRP main menu and tap Reboot System. 
 18) That's all,first boot might take a few minutes so be patient and your device may restart several times
19) After that your phone start normally and  you can see a Supersu Apps,
20) You can check your device rooted or not by using root checker apps from playstore.

(Rooting a device void your warrenty so do it at your own risk, after root you can use a custom/ modify OS on your phones).

Note: If your phone have Android version 7.x.x then you have to perform format data before install SuperUser (SU).

No comments:

Post a Comment

People also Like

Post Top Ad